Temperature Shock chamber FitoTerm 150 CTE

The Temperature Shock test chamber ‘FitoTerm 150 CTE2’ has two independent (Hot/Cold) test spaces in the same chassis allowing ultra fast temperature changes to the test specimens by means of an interior lift.

Temperature Shock chamber FitoTerm 150 CTE

The Fitoterm 150 CTE2 has two independent chambers in the same chassis. The higher chamber supports heat tests up to +200ºC, with heating by means of electrical heater and air circulation for optimal uniformity.

The lower chamber is for cold tests down to -75ºC, with dynamic ventilation at +/- 2m/s for homogenization and uniformity of the temperature. The temperature shock test is accomplished by the transfer between the two chambers.

Using an electromechanical lift, with a transfer speed of less than 5 seconds, it also incorporates a slowing down mechanical system to eliminate vibrations that might interfere with the test

product details
  • INTERNAL DIMENSIONS (H x W x D) (mm)
    410 mm x 470 mm x 650 mm
  • EXTERIOR DIMENSIONS (H x W x D) (mm)
    2.180 mm x 950 mm x 1.910 mm
  • INTERNAL VOLUME (Litres)
    125
  • TEMPERATURE RANGE (ºC)
    -75°C to 200°C
  • TEMPERATURE STABILITY
    ± 0,5ºC
  • TEMPERATURE UNIFORMITY
    ± 1,0ºC
  • ELECTRICAL CONNECTION
    3/N/PE AC 400V 10%; 50Hz